|
I just measured the master pattern for the H-Class Folder.
Overall length open is: 11 and 3/16ths inches.
Overall length closed is: 6 and 3/16ths inches.
Blade width, top to bottom (not counting the thumbramp area) is:
1 and 5/16th's inch.
And as stated previously, blade length is 5 inches by 3/16th thick,
made from CPM S-30V steel
Tested at Rockwell "C" Scale hardness of 59 on knifemaker
Bob Lums Rockwell hardness tester.
This means my new digitally controlled heat treat oven is spot on.
|