|
It is most likely your mags. Could also be a combo of your mags and recoil spring
Did you put +2 baseplates on them? If so you will need to get the extra power Wolff Magazine spring or eqivalent---It is recommended that you put the xtra power spring in factory high caps as well, as your mags will tend to function more reliably, long term. Your weak mag spring is not pushing the follower up firmly/sharply enough to engage the slide stop. Also if you replaced the recoil spring and or recoil spring guide rod with a heavier version, you will see these problems too. A more forceful return to battery because of a xtra power recoil spring in combination with your weak mag springs will not reliably allow the slide stop to be engaged.
I would first work with your mags.
|