[G Wheeler II]

Hey All

I am finally getting around to posting a few pictures of some of the knives I have made. About 90% of my blades are forged and all of the Damascus I use is made by me here in the shop. My knives are first and foremost working knives designed to cut very well and maintain a sharp edge as well as the steel used will allow, all steels are not created equal. I prefer to use High carbon steels but will on occasion or upon request stock remove a blade from stainless steel. All my knives are cutting tools no matter how nice they may look, they are designed to work hard and last a long time.

For years now I have been making a field grade line of knives that are machine finished down to 220 grit, then bead or sand blasted for that non glare look. With no hand finish work I save bunches of time and can keep the cost down.(( picture 1&2 ))

My way of giving back to guys who are serving now.

E-5 and below 20% OFF (all SF NCO's get this one too)
E-6 and above 10% OFF

I keep out of trouble and maintain my sanity working in the shop M-F, with my Old Buddy Kim Breed. When it is not going so good or we are waitng for something to cool or heat up, we walk down to the range and shoot a good bit...,