Quote:
|
Originally Posted by Sinister
If the gas port were to be drilled a couple of thousandths smaller or the entire gas system extended out two inches (like Armliate's and Rock River's mid-length gas system) your port pressure will be WAY lower.
|
What about just lengthening the gas tube and make 1, 2, or 3 wraps around the barrel to give a bit of delay and to reduce the amount of pressure that the carrier assy is being subjected to ??? This would also cause the "Extraction" event to occur when the Chamber Pressure is radically less and thereby reduce the friction between the case and the chamber !!
Just my simple .02 worth .
Martin