|
Get the wiggle out
I have a CAR-15, and an M4 with the Accuwedge. I also have an M4 with a Barnes Precision lower that has the adjustable tension pin. The Barnes can be set up tight as a tick, no wiggle; and I thought that was great, nothing better. When I needed to break it down and clean it, I initiated the proces like usual, I jammed my nail into the take down pin and it didn't budge. I squeezed the upper and lower together like I do for the Accuwedge guns and still that pin would not budge. I had to take the pistol grip off and loosen the tension pin to get the two halves apart. That concerned me. The tight fit made the gun feel solid (which I really like) but It also made it tough to field strip the weapon without tools. If you're putting together a match gun I think tight is good. The Accuwedge is cheap, takes most (99%) of the wiggle out, and you can disassemble without tools. Seems like the Accuwedge is the way to go for the all around fix.
|