|
Base gun
I'm going to have to talk with my BATF enforcement guy to get a clarification but I think I have my test base; an HK flare pistol. There are folks making cartridge adapters to put 12ga in 26mm flare guns so I'm thinking I may be able to built my test pistol using a piece of rifled tube turned to fit the HK. I'm wondering if incerting an adaptor qualifies as "manufacturing a firearm".
I would cut the chamber about 3 inches deep and use a brass shotgun shell cut to 2.5 inches loaded with a slug. Pressures should not be an issue, I could use a very reduced load to get this started.
Not fond of the HK's grip angle but what the hell, its only for concept...
MVP
|