[Buffalobob]

I did as I was told and went to the gunshop and they had no gun butter but they had the Militec and the TW 25B so that is what I bought. I also got some better ammo also. I field stripped it and there was hardened grease in the slide rails and after some work with carb cleaner and Gun Scrubber, I got the grease softened up enough to get most of it out. Then I coated it with the Militec and used a heat gun on it. Then I lubed the rails and called it good.

The empty PMC brass was loaded back up with max (not +P) loads of HS6 and Power Pistol and Hornady 90 and 115 gr XTP.

Took the pistol back to the range and it was just a different gun all together. There was almost no recoil and very little right twist any more. Everything feed perfectly without a single stoppage. The funny thing is that the 124 Golden Saber +P had less muzzle movement than the PMC ammo had the first time around.

The whole issues seems to have been the hardened factory grease and once that was gone it was really smooth and pleasant.