[jbour13]

Originally Posted by gtcrispy

Few quick pics of mine. Went to range to work on breaking it in. Had some malfuctions as far as chambering rounds. We'll see how it goes after I get more rounds through it. The only thing I don't like on it right now is that trigger has a bit more slack then my Kimber Warrior.

What ammo were you using, just seems like a lot of powder burn outside the muzzle.

I say Winchester white box, but PMC does the same thing.

Acetone the slide and any parts that rub together to speed the lapping process and it'll break in faster. Just make sure you clean it really well after shooting before you lube it.

Para's have a finicky extractor setup and some require tuning or spring replacements to make them run good.

Was it chambering the round high (getting hung on the case lip), or just from being a bit dirty. If it keeps up, polishing compound on the feedramp and a good jewelry polishing cloth will fix most small feedramp problems. I'm a Dremel wizz, but don't recommend this for everyone.