Quote:
Originally Posted by ODA 226
Reaper,
I agree with your assessment 100%! No attempt to move this item should have been made and absolutely no attempt at a high-order detonation since civilians were in the area!
While a low-order det with a Baldrick could have been attempted, the SAFEST method would have been a low-order det using a Vulcan Disrupter. A magnesium disk is shot into the explosive cavity at its weakest point. The disk begins a slow burn on the explosive fill. There would be a requirement to build a surround encompassing the target just in case there is an unintended high-order det.
After the explosive fill is burned, a Baldrick could then be used to detonate the fuse of the device.
We used this technique with great success in the Balkans. There are other ways to remove this item, but IMHO, this is the safest under peacetime conditions.
|
Agree with all of the above. If you can't order any premade charges or Disrupter or "flares" then think about shaping your C-4 into Shape charges. Simple Ways and the lower the amount of C-4 you need. I'll look on the need for a book that you can maybe order. Maybe somewhere like Ebay may have one or two. Seem them before on there.
BTW - Love reading and looking through your post Gladan! Dobar Veche svetlo...