Quote:
|
Originally Posted by Buffalobob
The reputable barrel makers such as Lilja, Krieger, Rock, etc will not cut the flutes too deep.
When you build a hunting rifle and hang a 30 -34 inch barrel off of the action you have to make some compromises between wieght and stiffness. Fluting may be one compromise. The other routes are to use a very stiff action or to go to a barrel block. Such a rifle will normally be guaranteed by the gunsmith to shoot under 0.5 MOA and in reality will shoot something like 0.25-0.3 MOA .
|
A 30-34 inch barrel?
Are we talking .50 BMG or black powder here?
TR
__________________
"It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat." - President Theodore Roosevelt, 1910
De Oppresso Liber 01/20/2025
|