Ive been using a simple scraper tool from Brownells to clean inside the bolt carrier that works ok.

But this tool looks amazing....

Would be great if you could shoot a demo and post on youtube.

Call it a training aid/advertising...

High-Speed Tool
 

have you gentlemen seen these?

http://www.magna-matic.com/crt/product_line/crt-15.html

It doesn't address many of the places the CAT tool cleans. Plus the CAT tool works really well, and it's made by one of our own. - Got mine last week.

HMass18Z PM sent

Well guys and gals, I figured it wouldn't take long, but I guess somebody liked out tool so much they needed to infringe on our design. So, as a service to all the guys out there ..... here is the web site of the guys that STOLE OUR DESIGN:

http://www.botachtactical.com/m4ct.html

And.....again, here is the web site of our PATENTED TOOL:

http://catm4.com/

Thanks guys !!

HM

I feel a smack down coming........ I need to stock up on Reutberg for the big show.....

HM - great tool. hope you shut down botach pronto.

by the way, something i discovered when using the catm4 (and HM posted this on the catm4 website as well) - not all bolt tails have the same contour and some may not make full contact with the scraping edges on the tool. i found that you can use the OUTSIDE of the tool to scrape the tail as well, and by applying pressure a bit more here or there, will take care of those dimensional differences between bolts. there's a pic in my writeup:
http://www.militarymorons.com/weapons/access.html#catm4